Table of Contents
Advertisement
2
Select the desired RAID mode under "RAID Mode" and click Build New RAID Array.
3
Click OK when a warning message is displayed.
4
Click OK again. Creating RAID array will begin. The TeraStation will shut down automatically after about a
minute.
5
When the remote desktop is disconnected, press the power button on the TeraStation to turn it on.
6
Connect the Windows Storage Server via the remote desktop.
7
From the Windows Storage Server Start menu, click RAID Builder.
8
Click Format RAID and OK.
When formatting is finished, the RAID array is now created.
You can also format the existing RAID array using Format RAID on RAID Builder.
Note: When the "Drive Rebuilding" message is displayed under "Error" on Buffalo Dashboard, a new RAID array
cannot be created. Wait until the message disappears, then try again.
21
Advertisement
Table of Contents
