Table of Contents
Advertisement
Web screen configurations (continued)
Frame Mix
Select for frame addition (gain-up using sensor storage) amount.
When frame addition is performed, it will appear as if the images are
missing some frames.
Setting value: Off / 6dB / 12dB / 18dB / 24dB
Factory settings: Off
• This cannot be configured when the format is 1080/29.97p,
1080/23.98p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p, or
1080/25PsF.
• [Frame Mix] cannot be set to [18dB] or [24dB] when [Iris Mode],
[Gain], or [Focus Mode] is set to [Auto]. (When setting [Frame Mix]
to [18dB] or [24dB], set [Iris Mode] and [Focus Mode] to [Manual]
and set [Gain] to any setting other than [Auto].)
<NOTE>
• Under discharge tube illumination, such as fluorescent and mercury-
vapor lights, the brightness may change synchronously, colors may
change, and horizontal stripes may flow up and down the image.
In such cases, we recommend setting the electronic shutter speed
to 1/100 in regions with 50 Hz power supply frequency, and to OFF
in regions with 60 Hz power supply frequency.
ND Filter
Set the transmittance of the lens' built-in ND (neutral density) filter.
Setting value:
Through
Do not set ND filter.
1/8
Set ND filter transmittance to 1/8.
1/64
Set ND filter transmittance to 1/64.
Factory settings: Through
Day/Night
Switch between standard shooting and night-vision shooting (shooting
with infrared light).
Setting value:
Day
Standard shooting (day mode)
Night
Night-vision shooting (night mode)
Factory settings: Day
<NOTE>
• The iris will be forcibly opened.
• White balance adjustment is not possible in night mode.
• ND filter switching is not possible in night mode.
• Pedestal adjustment is not possible in night mode.
Picture
75
Advertisement
Table of Contents
