Sound Test; Image Test - Huawei TE80 Administrator's Manual

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Verification Result




2.3.2 Sound Test

By performing a sound test, you can check whether the audio input and output of the endpoint
is correct.
Prerequisites


Procedure
Step 1 Choose Advanced > Diagnostics > Sound and Color Bar Test from the option bar.
Step 2 Select Sound Test.
----End
Verification Result



2.3.3 Image Test

By performing an image test, you can check whether the video input and output of the
endpoint is correct.
Prerequisites
The endpoint has been connected to video sources and a display device.
Procedure
Step 1 Choose Advanced > Settings > Video > Common Settings > Video Input from the option
bar. Set the Video Source parameter to the video input ports to which video sources are
connected.
Step 2 Check whether the videos from connected video sources are correctly displayed on the display
device.
----End
Issue 02 (2014-03-30)
If you successfully place a call to the remote site using its IP address, the IP network is
functioning properly.
If you successfully place a call to an H.323 site, the endpoint has registered with the GK
server.
If you successfully place a call to a SIP site, the endpoint has registered with the SIP
server.
The endpoint has been connected to an audio input device such as a microphone.
The endpoint has been connected to an audio output device, such as a speaker, or
connected to a television using an HDMI cable.
If the speaker emits a "ding ding" tone when there is no audio input, the audio output of
the endpoint is correct.
If audio inputs, for example human voices, are received from the microphone and the
speaker emits the voices, the audio input and output of the endpoint are correct.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Basic Configuration and Verification
14