Table of Contents
Advertisement
User
User
Manual
Manual
7 Click Save button to take effect. When the motion is detected during the detection time in the detection area,
the camera will alarm and adopt the corresponding alarm indicators.
NOTE
:
You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
4.6 Record
4.6.1 Storage Location
4.6.2 Local Alarm Location
On this page you can enable local alarm record, and select the local alarm record time.
4.7 Firewall
This section explains how to control the access permission by checking the client PC's IP addresses. It is
composed of the following columns: Block access from these IP addresses and Only allow access from
these IP addresses.
Figure 4.49
Figure 4.50
49
Advertisement
Table of Contents
