7 Click Save button to take effect.
area, the camera will alarm and adopt the corresponding alarm indicators.
NOTE:
You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime.
4.7 Record
4.7.1 Storage Location
On this page you can change the manually recording storage path, the default storage path is
C:\IPCamRecord.
Recording Location : FTP.
Local Recording Location: For Windows OS, the manual recording path is C:/ IPCamRecord, you can
change another one. For MAC OS, the manual recording path is: / IPCamRecord.
4.7.2 Alarm Record
4.7.3 Local Alarm Location
On this page you can enable local alarm record, and select the local alarm record time.
When the motion is detected during the detection time in the detection
Figure 4.36
Figure 4.37
50