Table of Contents
Advertisement
User
User
Manual
Manual
4.5 Alarm
Motion Detection
IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or
upload images to FTP.
Figure 4.44
To enable motion detection, follow the steps below:
1 Enable Motion detection
2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be
more easily alarmed. Select one motion sensitivity.
3 Trigger interval--- The interval time between two motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
4 There are some alarm indicators:
A PC Sound
If you select PC Sound, when the motion has been detected, the people around the PC will hear beep alarm
sound.
B Send E-mail
46
Advertisement
Table of Contents
