Mail Settings - SAB SABIP1300 User Manual

User User Manual Manual
HTTPS port:
The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port.
ONVIF port:
By default, the ONVIF port is set to 888. Also, they can be assigned with another port number
between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports.
RTSP port:
The default port is 554,only some IP Cameras have RTSP port.

4.3.5 Mail Settings

If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
5
1
2
6
3
4
Figure 4.32
1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually
set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually
is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be
set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you
select.
2-----SMTP Username/ password: ID account and password of the sender email address
3----- Sender E-mail Mailbox for sender must support SMTP
4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers
5----- Save Click Save to take effect
6----- Test Click Test to see if Mail has been successfully configured.
Click Test to see if Mail has been successfully configured.
38