NOTE:
If the camera cannot be accessed, please make sure the port forwarding is succeed.
ONVIF port:
By default, the ONVIF port is set to 888. Also, they can be assigned with another port number
between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports.
HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port.
RTSP port: The default port is 554. Only some IP Cameras have RTSP port.
4.4.6 Mail Settings
If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
1-----SMTP Server/ Port /Transport Layer Security
set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually
Figure 4.19
Figure 4.20
Enter SMTP server for sender. SMTP port is usually
40