Table of Contents
Advertisement
NVR User Manual
1.4
Icons Description
In the live view mode, there are icons at the right top of the full screen.
：The HDD is full, and the recording has been stopped.
: A HDD is not inserted into the NVR or the HDD connected to the NVR is abnormal.
In the live view mode, there are icons at the right bottom of the screen for each channel,
：NVR is recording for the IPC.
：The alarm of the IPC is triggered.
The icon
at the right top of the windows: Exit current menu to upper level menu.
1.5
Common Operations
Starting Up the NVR
Turn on the power switch on the rear panel. The Power indicator LED should turn green
indicating that the device begins to start up.
Note
If the power LED indicator on the front panel is off, please check if the power supply is
plugged into an electrical outlet and the power switch is turned on;
Shutting Down the NVR
There are two proper ways to shut down the NVR. To shut down the NVR:
Shutting down the NVR by the IR Remote Control.
Press and hold the POWER button for 3 seconds by the IR Remote Control, and the device
will enter power-off process.
There are two proper ways to shut down the NVR in the GUI interface.
- After login, right-click the mouse, you can click Shutdown in the shortcut menu.
8
Advertisement
Table of Contents
