SAB SAB2000A User Manual page 7

NVR User Manual
After the external alarm function is enabled and the linkage recording channel is
selected, I/O alarm recording is enabled when an external alarm is triggered in the
trigger time segment.
- Motion Detection Recording
After the motion detection function is enabled and recording is selected, motion
detection recording is enabled when motion detection is triggered in the detection time
segment and detection area.
Note
When NVR system time and IPC time are different, the NVR recording will based on the
NVR system time.
Playback
You can play back video files stored in the HDD. Recording includes schedule recording,
manual recording, and alarm recording. Single-screen playback and four-screen
synchronous playback are supported. When display mode is 1080P, it only supports the
single-screen playback.
Alarm
Alarms include I/O alarms and motion detection alarms.
 I/O Alarm
External alarm input devices are connected through the alarm input interface and external alarm
output devices are connected through the alarm output interface. After the devices are connected
successfully, you can configure information about the external alarm devices. When an alarm is
triggered in the preset time segment, the NVR system transmits the alarm information to an
external alarm output device, which makes corresponding response. The NVR system can also
enable I/O alarm recording, send pictures to your mailbox and the buzzer of the NVR will sound.
Motion Detection Alarm

You can configure motion detection information about the corresponding channel in the NVR
system. When an object moves in the detection time segment and detection area, an alarm is
triggered, the NVR system enables motion detection recording, and the alarm output device
outputs the alarm, sends pictures to your mailbox, and uploads pictures to your FTP server.
IPC Management
6