Table of Contents
Advertisement
NVR User Manual
Step4
Click Save button to take effect.
-------End
OSD
You can configure the OSD (On screen Display) information of the NVR.
Step1
Choose "
displayed.
Step2
You can configure the follow parameters.
Parameter
Channel
Channel name
Display Channel
Name
Display Time
Step3
You can configure the privacy zone settings for the camera. Check the Enable Privacy
checkbox and it pop up a window. If the IPC device type is MJ or IPC protocol type is ONVIF,
(Parameter Configuration) > Service Configuration > OSD",The OSD page is
Description
You can select one channel from drop-down box list..
You can modify the IP Camera's name.
After you modify the name and save the modification, the NVR
system synchronizes the channel name to the corresponding IPC
device name.
The channel name will be shown on the top left of the video
image.
There are two options: Yes or No. Select Yes and you can see the
IP camera's name on the video
There are two options: Yes or NO. Select Yes and you can see the
system date on the channel video.
80
Advertisement
Table of Contents
