Table of Contents
Advertisement
NVR User Manual
IP Camera Setup page is displayed.
Step1
You can see all IP Cameras searched in The Current LAN IPC List.
Step2
Select one channel from Channels.
Step3
Choose the IP Camera in the list of 'The Current LAN IPC List' .
Choose the Protocol from the drop list. Input the Username and Password of the IPC.
Click Add button to finish adding.
-------End
【 Manually Adding IPC】
You can also manually add the IPC device. After select any one of the channels, input
information of the IPC. Then click Add button to finish adding.
Hard Disk Information
You can configure the Disk Saturation, Pre-recorded Time for HDD information.
Step1
Choose "
The Hard Disk Information page is displayed.
Step2
You can configure the following settings.
(Parameter Configuration) > Device Management > Hard Disk Information".
71
Advertisement
Table of Contents
