Table of Contents
Advertisement
NVR User Manual
Parameter
Enable E-Mail
Authentication
SMTP Server
SMTP Port
Transport Layer
Security
SMTP Username
SMTP Password
Sender
First/Second
/Third/Fourth
Receiver
Step3
Click Save button to take effect.
Step4
Click Test to see if Mail has been successfully configured.
If the test success, you can see the success information, at the same time the receivers will receive a
test mail.
-------End
FTP Settings
The system can be configured to send an picture to the FTP server if an alarm or motion
event is detected etc..
Step1
Choose "
page is displayed.
Description
Enable or Disable the Email function.
Enable or Disable the server authentication feature.
The SMTP Server IP address or host name.
The SMTP port is usually set as 25. Some SMTP servers have
their own port, such as 587 or 465.
Transport Layer Security usually is None.
If you use Gmail, Transport Layer Security must be set to TLS
or STARTTLS and SMTP Port must be set to 465 or 25 or 587,
which port you choose should be decided by which Transport
Layer Security you select.
The user account of sender 's Email for SMTP server
authentication.
The password of sender 's Email for SMTP server
authentication.
The Email address of sender.
The Email address of user to be notified. you can set 4
receivers
(Parameter Configuration) > Local settings > FTP Settings". The FTP Settings
66
Advertisement
Table of Contents
