Table of Contents
Advertisement
NVR User Manual
2.1 Package Contents
When you receive the NVR, please open the box and check whether there is any visible
damage to the NVR appearance.
Then, please verify that all contents received are complete according to the package
contents listed below.
At last, please open the machine crust and check the data wire in the front panel, power
wire, the connection between the power and the main board.
● NVR
● DC Power Adapter
● Ethernet Cable
● USB Mouse
● Data Wire and Power Wire of the HDD
The package contents list does not contain HDD and IPC.
It is highly recommended that HDD should be used with over 7200 RPM. But Do not buy a
HDD with automatic sleep function, so as to maintain reliable and stable running of the
disks.
It is highly recommended to use the IPC which supports ONVIF protocol.
2.2 Installing the HDD
For the first use,please install the HDD.
WARNING
Before installing a hard disk drive (HDD), please make sure the power is disconnected from
the NVR.
Find the ESD gloves from the package of the NVR and wear the gloves.
1.Remove the cover from the NVR by unfastening the screws on the rear and side.
● CD
● Quick Installation Guide
● Screw Pack
● Antistatic Gloves
2
Device
10
Advertisement
Table of Contents
