Table of Contents
Advertisement
NVR User Manual
Step1
Choose "
displayed.
Step2
Configure the network parameter.
Parameter
Network Type
HTTP Port
HTTPS Port
IP Address
Subnet Mask
Gateway
Primary DNS
Server
Alternative
(Parameter Configuration) > Local settings > Network". The Network page is
Description
You can select the network type from the drop-down list box.
If select the DHCP, the NVR system will automatically obtain an
IP address and other network settings from that server.
If select the Static IP, you can configure an IP address and
other network settings.
The default value is 88.
The default value is 443.
You can configure the IP address of the NVR system.
Note:
The IP of IP cameras, PC and NVR should be in the same network
segment and in the same LAN.
The subnet mask of the NVR system.
The gateway of the NVR system.
The primary DNS server of the NVR system.
The secondary DNS server of the NVR system.
63
Advertisement
Table of Contents
