Table of Contents
Advertisement
Item
Transfer speed
Connector type
Cable
Network switch
Switch cascading
MAC address
Maximum transfer unit
(MTU)
Link aggregation
Tagged VLAN
IPv4
IPv6
Appendix D: Data and power cables
Hitachi Virtual Storage Platform G900 Hardware Reference Guide
Specification
10 Gbps
LC
Optical OM3, OM2 MMF
cable
L2 or L3 switch
Maximum: 5 switches or
fewer
Per port (fixed value)
1,500, 4,500, 9,000 bytes
(Ethernet frame)
Not supported
Supported
Supported
Supported
iSCSI specifications
Comments
N/A
N/A
N/A
Should comply with
IEEE802.3ae
Minimum number of
cascading switches is
recommended.
Factory setting: World Wide
Unique value. Cannot be
changed.
Jumbo frame, MTU size
greater than 1500
N/A
N/A
N/A
Note the following
precautions:
When iSCSI Port IPv6 is
■
set to Enabled, if the
IPv6 global address is
set to automatic, the
address is determined
by acquiring a prefix
from an IPv6 router.
If the IPv6 router does
■
not exist in the network,
the address cannot be
determined. As a result,
an iSCSI connection
might be delayed. When
an iSCSI Port IPv6 is set
to Enabled, verify the
IPv6 router is connected
to the same network,
and then set IPv6 global
address automatically.
99
Advertisement
Table of Contents
