Appliance Break-In; Heat Management - Majestic JADE42IN Owner's Manual

G. Appliance Break-In
Follow the initial break-in procedure below to cure the
materials used to manufacture the fireplace and the
finishing materials around it.
• The fireplace should be run three to four hours
continuously on high.
• Turn the fireplace off and allow it to cool completely.
• Remove fixed glass assembly. See Section 4.B.
• Clean fixed glass assembly. See Section 4.B.
• Replace the fixed glass assembly and run continuously
on high an additional 12 hours.
Note: Some IPI systems have a safety feature that
automatically shuts down the fireplace after 9 hours of
continuous operation without receiving a command from
the remote control. If this occurs, restart the appliance.
NOTICE! Open windows for air circulation during fire-
place break-in.
• Some people may be sensitive to smoke and odors.
• Smoke detectors may activate.
Majestic • JADE32IN, JADE42IN, JADE42IL Owner's Manual • 2491-987 Rev. F • 9/18
H. Heat Management
Optional Fan
A fan can be added to your appliance to push more
warmth into your space. The optional fan must be used
in conjunction with the IFT-RC400 remote control. Fan
speed is controlled through the remote control only. An
optional fan can not be installed if the Smart-Wall™ TV
Kit is installed.
Optional Smart-Wall™ TV Kit
The optional Smart-Wall™ TV Kit heat management
option allows you to bring the warmth from your fireplace
to the rest of your home, up to 20 feet away. Safely place
a TV 12 inches above the fireplace. The Smart-Wall™ TV
Kit must be installed by a qualified technician during the
appliance installation process. The Smart-Wall™ TV kit
must be used in conjunction with the IFT-RC400 remote
control.
Optional Heat-Zone -Gas Kit
®
The Heat-Zone -Gas heat management option is avail-
®
able for use with the JADE32IN, JADE42IN and JADE-
42IL appliances and must be used in conjunction with the
IFT-RC400 remote control. The Heat-Zone
be installed by a qualified technician during the appliance
installation process. The Heat-Zone Kit draws heat from
your fireplace to an adjacent room in your home, up to 20
feet away.
Optional Heat-Out-Gas Kit
The Heat-Out-Gas heat management option is available
for use with the JADE32IN, JADE42IN and JADE42IL
appliances and must be used in conjunction with the IFT-
RC400 control. The Heat-Out-Gas kit must be installed
by a qualified technician during the appliance installation
process. The Heat-Out-Gas kit draws heat from your
fireplace and directs it outside, up to 25 feet away.
Optional Heat-Duct Kit
The Heat-Duct heat management option is available
for use with the JADE32IN, JADE42IN and JADE42IL
appliances. The Heat-Duct-Gas kit must be installed by
a qualified technician during the appliance installation
process. The Heat-Duct redistributes heat from the
fireplace via the furnace ductwork.
-Gas kit must
®
13