Initial Setting (Standby Mode); Initial Setting (Screen Setting) - Panasonic PT-EZ770T Operating Instructions Manual

Hide thumbs Also See for PT-EZ770T:
Table of Contents

Advertisement

Initial setting (standby mode)

Set the operation mode during standby. The default setting is [ECO] that keeps power consumption low during standby. When the network
function is used during standby, set to [NORMAL]. After completed the initial setting, you can change the setting from the [PROJECTOR
SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE].
1)
Press qw to switch the setting.
2)
Press the <ENTER> button to proceed to the initial setting.
Note
f The above initial setting screen is the one displayed when the projector is switched on for the first time after purchase. When [ALL USER
DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the setting of [STANDBY MODE] before execution is displayed.

Initial setting (screen setting)

Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the settings of each
item from the [DISPLAY OPTION] menu → [SCREEN SETTING].
1)
Press as to select an item.
2)
Press qw to switch the setting.
3)
Press the <ENTER> button.
f Confirm the setting value and complete the initial setting.
Note
f If you press the <MENU> button on the initial setting screen, you can go back to the previous screen.
f To continue operations after completed the initial settings, refer to "Selecting the input signal" (x page 47).
f By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTOR
SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Chapter 1 Preparation — Start-up display
INITIAL SETTING
STANDBY MODE
If STANDBY MODE is set to ECO, you cannot use
network functions when the projector is standing by.
Also, you cannot use some RS-232C protocol
commands.
CHANGE
SET
ENTER
INITIAL SETTING
SCREEN FORMAT
SCREEN POSITION
Set as necessary for the screen in use.
MENU SELECT
SET
ENTER
3/4
ECO
4/4
16:10
CHANGE
ENGLISH - 21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-ew730tPt-ex800tPt-ew730zPt-ez770zPt-ex800z

Table of Contents