[Eco Management] - Panasonic PT-EZ770T Operating Instructions Manual

[ECO MANAGEMENT]

This function optimizes lamp power according to the operating status to reduce power consumption.
Setting [LAMP POWER]
Switch the brightness of the lamp according to the operating environment of the projector or the purpose.
1) Press as to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3) Press as to select [LAMP POWER].
4) Press qw to switch the item.
[AUTO]
[NORMAL]
[ECO1]
[ECO2]
Note
f When [ECO1] and [ECO2] are set, you can reduce power consumption and operation noise, and extend the life of the lamp.
f When [LAMP POWER] is set to [ECO1] or [ECO2], [AMBIENT LIGHT DETECTION] cannot be set.
f When [PICTURE MODE] (x page 60) is set to [DICOM SIM.], [LAMP POWER] cannot be set. [LAMP POWER] is fixed to [NORMAL].
Setting [AUTO POWER SAVE]
Set whether or not to enable the three functions, [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [SHUTTER DETECTION].
1) Press as to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3) Press as to select [AUTO POWER SAVE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
5) Press as to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], [SHUTTER DETECTION].
[AMBIENT LIGHT
DETECTION]
[SIGNAL DETECTION]
[SHUTTER DETECTION]
6) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f When [AUTO POWER SAVE] is set to [OFF], settings of [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], [SHUTTER DETECTION]
are unavailable.
f When objects, etc. are placed around the luminance sensor on the top of the projector, [AMBIENT LIGHT DETECTION] may not function
properly.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Power is automatically adjusted so that optimum luminance is obtained according to the brightness of
input signals.
Select when high luminance is required.
Power is lowered by about 25 % on average compared to the [NORMAL] setting.
Power is lowered by about 30 % on average compared to the [NORMAL] setting.
Enables the energy conservation setting.
Disables the energy conservation setting.
Adjusts the power of the lamp according to the brightness of the installation location.
Lowers the power of the lamp when there is no signal.
Lowers the power of the lamp when the shutter is closed.
Enables the setting.
Disables the setting.
ENGLISH - 85