Connecting Example: Av Equipment - Panasonic PT-EZ770T Operating Instructions Manual

<DisplayPort IN> terminal pin assignments and signal names
Outside view
Even-numbered pins of (2) to (20)
(2) (20)
(1) (19)
Odd-numbered pins of (1) to (19)
*1 Supplies power of +3.3 V/0.5 A Max. Use at the rated power or less.
<DVI-D IN> terminal pin assignments and signal names
Outside view
(24) (17)
(16)
(8) (1)

Connecting example: AV equipment

VCR (with built-in TBC)
Attention
f Always use one of the following when connecting a VCR.
g A VCR with built-in time base corrector (TBC)
g A time base corrector (TBC) between the projector and the VCR
f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the
projector and the external devices.
Chapter 2 Getting Started — Connecting
Pin No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Pin No.
(1)
(2)
(3) T.M.D.S data 2/4 shield
(4)
(5)
(6)
(9)
(7)
(8)
(9)
(10)
(11) T.M.D.S data 1/3 shield
(12)
Blu-ray disc player
Signal name Pin No.
MainLane-3
GND
MainLane+3
MainLane-2
GND
MainLane+2
MainLane-1
GND
MainLane+1
MainLane-0
Signal name Pin No.
T.M.D.S data 2-
T.M.D.S data 2+
—
—
DDC clock
DDC data
—
T.M.D.S data 1-
T.M.D.S clock1+
—
Audio device
DVD player with HDMI terminal (HDCP)
Signal name
(11) GND
(12) MainLane+0
(13) GND
(14) GND
(15) Aux+
(16) GND
(17) Aux-
(18) Hot plug detection
(19) GND
(20) DP_PWR
Signal name
(13) —
(14) +5 V
(15) GND
(16) Hot plug detection
(17) T.M.D.S data 0-
(18) T.M.D.S data 0+
(19) T.M.D.S data 0/5 shield
(20) —
(21) —
(22) T.M.D.S clock shield
(23) T.M.D.S clock+
(24) T.M.D.S clock-
ENGLISH - 39
*1