Removing Car Seat - Century PM-1109AB Instruction Manual

5
Attach appropriate snaps to
secure car seat to stroller:
Forward-facing
Snap
Rear-facing
Snap
NOTE: Use of proper snaps
provide the snuggest
attachment to stroller frame.
6
Pull up on car seat to be
sure it is locked in child's
tray.
NOTE: Car seat comes with a level indicator which is not
applicable when car seat is used in stroller frame.
WARNING
Avoid serious injury from falling or sliding
out:
• Always use harness straps to restrain child,
even when sleeping.
• Always be sure car seat handle is in locked
upright carrying position when lifting or
carrying child.
• Always make sure car seat is locked into
child's tray before each use.
• Always be sure stroller is fully set up and
fold locks are engaged before using.
• Always be sure brakes are locked when
attaching and removing car seat from
stroller frame.
CAR SEAT/STROLLER USE continued

Removing Car Seat

1
Set both rear brakes to prevent
stroller from moving.
2
Be sure handle is locked in upright carrying position.
DO NOT lift car seat from child's tray until you have heard
a "click" sound and have checked that handle is locked.
3
Pull Red Button on front of
child's tray out and lift car seat.
4
After removing car seat, insert
Tongue of child's tray pad into
child's tray Slot.
Red Button
Tongue
Slot
6