Installation Without Base - Century PM-1109AB Instruction Manual

INSTALLATION
1
Place car seat rear-facing
Thread vehicle lap belt through car seat Slots
2
and buckle belt.
NOTE: Vehicle shoulder belt must NOT be
placed through car seat Slots.
3
Press down firmly on car seat to compress
vehicle seat cushion while tightening vehicle
lap belt (fig. a).
4
Pull front to back and left to right to check for
secure installation (fig. b).
If not secure, see "Vehicle Seat Belts" section.
5
Ball MUST be in green zone (fig. c). If
necessary place rolled Towels under car seat
at vehicle seat crease.
NOTE: Vehicle must be on level
ground and child in car seat
when leveling.
6
Adjust handle to a position
behind car seat.
WITHOUT BASE
on vehicle seat.
(fig. a)
Slots
Towels
(fig. b) (fig. c)
7