Assembly; Opening Stroller; Front Wheel Assembly; Locking Footrest - Century PM-1109AB Instruction Manual

Opening Stroller

1
Stand stroller upright and
rotate lever to release latch.
2
Spread handle and rear legs
until both Fold Locks "click"
into position.
3

ASSEMBLY

Front Wheel Assembly

1
Hold swivel wheel assembly
upright (Tab pointing down).
2
Tilt stroller slightly back and
push wheel assembly onto leg
until it locks in place.
Repeat steps 1 and 2 for
opposite leg.
CAUTION:
wheels to check that they are locked in place.

Locking Footrest

Push footrest down so that
Cross Tube is centered between
three (3) Tabs on bottom of
footrest, and it snaps in place.
Fold Locks

Rear Wheel Assembly

1
Remove axle protectors from ends of axle and discard.
2
With stroller laying face down
on floor, slide brake lever brackets
onto rear legs until you hear a
click.
NOTE: Brake levers must face
rear of stroller.
After wheel assembly is complete, pull on
Cross Tube
Tab
Tabs