Philips AC2889/10 User Manual page 9

Note
• This instruction is only valid when
the air purifier is being set up for
the first time. If the network has
changed or the setup needs to be
performed again, consult section
"Reset the Wi-Fi connection" on
page 7.
• If you want to connect more than
one air purifier to your smartphone
or tablet, you have to do this one by
one. Complete the set up of one air
purifier before you turn on the other
air purifier.
• Make sure that the distance
between your smartphone or tablet
and the air purifier is less than 10 m
without any obstructions.
• This app supports the latest
versions of Android and iOS. Please
check www.philips.com/cleanhome
for the latest update of supported
operating systems and devices.
Reset the Wi-Fi connection
Note
• This applies when the default
network to which your purifier is
connected has changed.
• Reset the Wi-Fi connection when
your default network has changed.
1
Put the plug of the air purifier in the
power socket and touch
on the air purifier.
2
Touch and simultaneously for
3 seconds until you hear a beep.
» The air purifier goes to pairing
mode.
» The Wi-Fi indicator
orange.
3
Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the first
time" section.
to turn
blinks
EN
7