Programmer Clock - Smeg TRA93P User Manual

3.7 Programmer clock

1 Minute minder timer key
2 Cooking duration key
3 End of cooking key
4 Value decrease key
5 Value increase key
The programmer clock controls
exclusively the right multifunction
oven and has not any control on
the other ovens.
62
Use
Setting the time
On the first use, or after a power failure, the
digits
appliance's display.
1. Press the
time. The dot between the hours and the
minutes flashes.
2. The time can be set using
Keep the key pressed in to increase or
decrease rapidly.
3. Press the
dot between the hours and the minutes
stops flashing.
4. The symbol
that the appliance is ready to start
cooking.
Timed cooking
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
1. After selecting a cooking function and
temperature, press key
will shows the digits
symbol
and the minutes.
2. Use the key
minutes.
3. Wait approx. 5 seconds without pressing
any key in order for the function to
activate. The current time and the
symbols
display.
will be flashing on the
and keys at the same
or
key or wait 5 seconds. The
on the display indicates
. The display
displayed between the hours
or to set the required
and will appear on the
.
and the