Table of Contents
Advertisement
Option Settings 1 Main Menu
Setting Name
Input
Auto Keystone
R C V H D U N Single
Correction
Auto Adjust
R
Eco Mode
R C V H D U N Single
Auto White
R C V H D U N Single
Balance
Auto Power Off R C V H D U N Single
Power On
R C V H D U N Single
Password
Direct Power
R C V H D U N Single
On
Setting Unit
Use this sub-menu to turn auto keystone correction on or off.
On*:
Select this option to turn on auto keystone correction.
Off:
Select this option to turn off auto keystone correction.
N Source
Use this sub-menu to select whether the projector should detect the
Specific
RGB input signal type (resolution, frequency) and adjust the
projection image accordingly (auto adjust).
1*:
Select this option to turn on auto adjust.
2:
Select this option to turn on auto adjust when a 1360 × 768 or
1400 × 1050 signal is not projected correctly.
3:
Select this option to turn on auto adjust when a 1366 × 768 signal
is not projected correctly.
Off:
Select this option to turn off auto adjust.
See "Eco Mode (Power Saving, Low Noise)" (page 19).
Turns automatic white balance adjustment on or off.
On*:
White balance adjusted automatically. Can improve color
reproduction.
Off:
White balance not adjusted automatically.
Auto Power Off lets you specify the amount of time of projector
operation and input signal inactivity to be allowed before Auto
Power Off is triggered to turn off projector power automatically. Auto
Power Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min:
Time until Auto Power off is triggered.
Off:
Disables Auto Power Off.
You can configure the projector to require input of a password
before operation is enabled. For details, see "Password Protecting
the Projector" on page 24.
Use this sub-menu to turn Direct Power On on or off. See "Direct
Power On" on page 23.
On:
Select this option to turn on Direct Power On.
Off*:
Select this option to turn off Direct Power On.
Description
35
Advertisement
Table of Contents
