Table of Contents
Advertisement
Setup Menu Contents
This section contains tables that provide detailed explanations of all of the items included on the setup
menu. The following describes the type of information that appears in each of the columns of the
tables.
Setting Name: This column shows the names of the settings as they appear on the sub-menu.
Input: This column shows the input source for which each setting is supported.
Input source names are abbreviated as follows:
R : RGB input
C : Component video input
V : Video or S-video input
H : HDMI (PC) input
D : HDMI (DTV) input
U : USB input (USB port models only)
The letter N indicates that the setting can be configured while there is no input signal.
Setting Unit: The setting unit indicates how a setting is stored.
"Source Specific" in this column indicates that separate settings can be stored for each
individual input source.
"Single" in this column indicates that a single setting is stored and applied, regardless of
the input source.
Description: This column provides details about the setting item and how to select it. The initial
default setting is indicated by an asterisk (*).
Image Adjustment 1 Main Menu
Setting Name
Input
Brightness
R C V H D U
Contrast
R C V H D U
Sharpness
V
Saturation
V
Tint
V
Setting Unit
Source
Use this sub-menu to adjust the brightness of the projected image.
Specific
A larger value produces a brighter image.
Source
Use this sub-menu to adjust the contrast of the projected image.
Specific
A larger value produces a stronger contrast.
Source
Use this sub-menu to adjust the sharpness of the outlines in the
Specific
projected image. A larger value makes the image sharper, while a
smaller value makes it softer.
Source
Use this sub-menu to adjust the color saturation of the projected
Specific
image. A larger value increases color saturation.
Source
Use this sub-menu to adjust the tint of the projected image.
Specific
A larger value makes the overall image more bluish, while a smaller
value makes the overall image more reddish. This setting is
supported only when the signal is NTSC or NTSC4.43.
29
Description
Advertisement
Table of Contents
