Digital Watchdog MEGApix DWC-MV74Wi28 User Manual page 34

Setup - Camera Setup
Camera Day & Night Settings
6
1
Day & Night
Auto: In this mode, the IR cut filter is removed automatically
depending on the light condition around.
Day: In this mode, the IR cut filter is applied to the image
sensor all the time. Thus, the sensitivity will be reduced in
the dark light condition but the better color reproduction
performance are obtained.
Night: In this mode, the IR cut filter on the image sensor
is removed all the time. The sensitivity will be enhanced
in the dark light condition but the image is black and white.
Schedule: In this mode, Day / Night mode is converted
accordance with the scheduled time.
2
Color Level
It is a level to change Night mode into Day mode when
Day & Night mode is Auto.
3
B / W Level
It is a level to change Day mode into Night mode when
Day & Night mode is Auto.
4
Transition Time
If it is set to Auto, to determine the rate at which
Day / Night is converted.
5
If it is set to schedule mode, Set the time that
Day / Night is converted.
6
Click 'Save' to save the current settings.
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
1
2
3
4
5