Quick Guide To Basic System Functions - Honeywell Home VISTA Series User Manual

Quick Guide to Basic System Functions

FUNCTION PROCEDURE
Check Zones Press READY key.
Arm System
Enter code. Press arming key desired:
(AWAY, STAY, NIGHT-STAY, MAXIMUM,
INSTANT)
Quick Arm Press #. Press arming key desired:
(if programmed) (AWAY, STAY, MAXIMUM, INSTANT)
Bypass Zone(s) Enter code. Press BYPASS [6] key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Quick Bypass Enter code. Press BYPASS [6] key + [#].
(if programmed)
Silence Sounders
Burglary:
Enter code. Press OFF [1] key.
Fire or CO:
Press OFF [1] key.
"Check":
Press any key.
Disarm System Enter code. Press OFF [1] key. (OFF need
not be pressed if entry delay or an alarm is
active)
Clear Alarm
After disarming, enter code again.
Memory
Press OFF [1] key again.
Duress (if active
Arm or disarm "normally," but use your 4-digit
and connected to
Duress code to do so.
Central Station)
Panic Alarms Press key [A], [B], or [C] for at least 2
(as programmed) seconds, or key pairs 1 + ;
respectively.
Chime Mode
To turn ON or OFF: Enter code. Press
CHIME key.
Test Mode
To turn ON: Enter code. Press TEST key,
then [0].
To turn OFF: Enter code. Press OFF key.
Phone Access
Consult Phone Access User's Guide that
if applicable
accompanies the Phone Module.
COMMENTS
View faulted zones when system not
ready.
Arms system in mode selected.
Arms system in mode selected, quickly
and without use of a code.
Bypassed zones are unprotected and
will not cause an alarm if violated.
Bypasses all faulted zones
automatically.
Also disarms system. Memory of alarm
remains until cleared.
Memory of Alarm remains until cleared.
Determine cause.
Also silences sounders. Memory of
alarm remains until cleared.
Keypad beeps rapidly on entry if alarm
has occurred while absent. Alarm
display will remain upon disarming until
cleared.
Performs desired action and sends silent
alarm to Central Station.
See the Panic Keys section for
emergency functions programmed for
+ #, or 3 + #
your system. Note: Keys "A", "B", and
"C" may have been programmed for
other functions.
The keypad will sound if doors or
windows are violated while system is
disarmed and chime mode is ON.
Tests alarm sounder and allows sensors
to be tested.
Permits system access remotely, via
Touch-tone phone.
– 46 –