Using Device Commands; About Device Commands - Honeywell Home VISTA Series User Manual

About Device Commands

Your system may be set up so that it can control certain lights or other devices.
• Some devices may be automatically turned on or off by the system.
• You may be able to override automatically controlled devices using the commands
described below.
• Some devices can be manually turned on or off using the commands described
below.
• See your installer for a list of devices that may be set up for your system. A list of
these devices is provided at the back of this manual for you to fill out.
To Activate Devices:
(Security Code)
Devices associated with that device number activate.
To Deactivate Devices:
(Security Code)
Devices associated with that device number deactivate.

Using Device Commands

+ [#] + [7] + 2-digit device number
+ [#] + [8] + 2-digit device number
Alpha Display:
Fixed-Word Display: READY
-25-
∗∗∗∗DISARMED∗∗∗∗
READY TO ARM