Accessing Other Partitions; About Accessing Partitions - Honeywell Home VISTA Series User Manual

Accessing Other Partitions

About Accessing Partitions

(GOTO Command and Multi-Partition Arming)
Each keypad is assigned a default partition for display purposes, and will show only that
partition's information.
• If the user is authorized, a keypad in one partition can be used to perform system
functions in the other partition by using the GOTO command. Refer to the GOTO
section.
• If the user is authorized, that user can arm other partitions. Refer to the Multi-
Partition Arming section.
The following table shows the relationship of the keypads in each partition when system
is armed and disarmed.
Arming
Disarmed

Condition 1
Disarmed

Condition 2
Armed

Condition 3
Armed

Condition 4
When both partitions are disarmed, the keypad in each partition displays zone status
for its partition only. The common zone keypad shows the status in that zone only. See
Condition 1 above.
When partition 1 is disarmed and partition 2 is armed, the keypad in partition 1 shows
the status of partition 1 and the common zone. Partition 2 will display the status of
partition 2 only. See Condition 2 above.
When partition 1 is armed and partition 2 is disarmed, the keypad in partition 1 shows
the status of partition 1 only. Partition 2 will display the status of partition 2 and the
common zone. See Condition 3 above.
As long as any one of the two partitions is disarmed, the common zone will always
be disarmed. The common zone will be armed only when both partition 1 and 2 are
armed. See Condition 4 above.
PARTITION 1
Keypad
State Status
Partition 1
Only
Partition 1 and
Common Zone
Partition 1
Only
Partition 1
Only
PARTITION 2
Arming Keypad
State Status
Disarmed Partition 2
Only
Armed Partition 2
Only
Disarmed Partition 2 and
Common Zone
Armed Partition 2
Only
– 30 –
COMMON ZONE
(LOBBY, etc.)
Arming Keypad
State Status
Disarmed Common Zone
Only
Disarmed Common Zone
Only
Disarmed Common Zone
Only
Armed Common Zone
Only