Checking For Open Zones; Using The [∗] Key To Display And Announce System Status - Honeywell Home VISTA Series User Manual

Checking For Open Zones

Using the [∗] Key to Display and Announce System Status
B
efore arming your system, all protected doors, windows and other protection zones
must be closed or bypassed; otherwise the keypad will display a "Not Ready" message.
Use the READY key to display all faulted zones, making it easier for you to identify and
secure any open zone.
1. Press [ ] (do not enter code first) to display faulted
Q
zones.
2. Secure or bypass the zones displayed.
The keypad's READY indicator lights when all
protection zones have been either closed or bypassed.
3. Arm the system as desired.
Voice Status: Voice keypads (if installed), can announce system status and faulted zones
(up to 3 zone descriptors) if the Voice Status feature is turned on.
To turn the Voice Status feature on/off:
(also turns on Voice Chime mode; see Chime mode section)
To announce Status:
To announce faults
and status:
# +
Press [#] FUNCTION + [0] VOICE + [∗] STATUS key.
(Announces current system status; e.g., "Disarmed Ready to
Arm.")
Press [#] FUNCTION + [0] VOICE + [∗] STATUS + [∗] again
(Announces up to three faulted zones with their zone descriptors,
if programmed.)
– 12 –
Alpha Display:
DISARMED
HIT ∗ FOR FAULTS
Fixed-Word Display:
Zone no. and "NOT READY"
0 + 2 + 4