Cannot Detect The Printer When Setting Up Network Communication - Canon 9491B003 Online Manual

Cannot Detect the Printer When Setting up Network
Communication
If the printer could not be detected on the network when setting up the network communication, confirm the
network settings before redetecting the printer.
Cannot Detect the Printer during Wireless LAN Setup: Check 1
Cannot Detect the Printer during Wired LAN Setup: Check 1
Important
• If the printer cannot be detected while you are setting up the network communication using a USB
cable, the printer may be in the access point mode. In this case, finish the access point mode and
enable the wireless LAN, then try to redetect the printer.
Using the Printer with the Access Point Mode
459