Ranger design C10-E Installation Manual page 5

PHASE 1 – ASSEMBLY
1.2 PARTITION ASSEMBLY
1.2.1 Remove all the PVC from all the parts, then attach the upper panel to the lower panel.
1.2.2 Attach both wings to the upper and lower panels.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q Knife
q 1/2" Socket
HARDWARE USED
5×
#90-200 Hex Bolt 5/16" × 1/2"
#98-116 Flat Washer
#94-116 Serrated Nut
TOOLS
q Cordless Impact
q 1/2" Socket
HARDWARE USED
14×
#90-200 Hex Bolt 5/16" × 1/2"
#98-116 Flat Washer
#94-116 Serrated Nut
C10-E Installation Guide | REV. F5 | Page 5