Ranger design C10-E Installation Manual page 10

PHASE 2 – INSTALLATION
2.3 CONTOURED PARTITION INSTALLATION
2.3.1 Lift the partition inside the van, then attach the 2 ceiling brackets on the upper panel.
TOOLS
q Cordless Impact
q 7/16" Socket
HARDWARE USED
4×
#90-108 Hex Bolt 1/4" × 5/8"
#98-112 Flat Washer
#94-112 Serrated Nut
For technical support, contact us at 1-800-565-5321
NOTE: Slide the floor bracket into the
slots on the floor.
C10-E Installation Guide | REV. F5 | Page 10