Advertisement
Power Connector: DC12V
Red: RS485A
Yellow: RS485B
Operation Instructions
1) Main Functions Fast Call Up
Our IR Speed dome supports 220 preset positions. You can activate some special
functions by calling upon code number 65-99.
Serial
Command
No.
1
Start Auto Scan
2
Start Auto Cruise
3
Start Pattern Tour
Start Auto Scan of
4
Group No.
Start Auto Cruise of
5
Group No.
Start Pattern Tour of
6
Group No.
Stop Auto Mode/End up
7
Setting
8
Open OSD Menu
9
Remote Reset
10
Recover Factory Default
2) System Self-Testing
The dome will do self-testing after power up, and system status will show
"Normal" if system Is running normally. If error happens, testing result will be
shown in "
" or "
○
according meaning as follows:
Call 80+ Call pp+ Call 99
Call 80+ Call pp+ Call 98
Call 80+ Call pp+ Call 97
Set 95（or Call 95）
". "
" means normal and "
○
X
Fast Call Up
Call 99
Call 98
Call 97
Call 96
Call 94
Call 82
" means error. Please check the
X
22
Note
Default to start auto scan of
group No.1
Default to start auto cruise of
group No.1
Default to start pattern tour of
group No.1
pp means：Group No.1-8
pp means：Group No.1-4
Advertisement
