Table of Contents
Advertisement
CAUTION!
The appliance is hot.
There is a risk of burns.
9. After Steam Cooking steam can
condensate on the bottom of the
cavity. Always dry the bottom of the
cavity when the appliance is cool.
Let the appliance dry fully with the door
open. To speed up the drying you can
close the door and heat up the appliance
with function: True Fan Cooking at
temperature 150°C for approximately 15
minutes.
6.9 Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
Minute
Minder
Duration
End Time
If you set the time for a clock function,
the time starts to count down after 5
seconds.
Application
To set a countdown
(max. 2 h 30 min). This
function has no effect
on the operation of the
oven. You can also turn
it on when the oven is
turned off.
Use
to turn on the
function. Press
or
to set the minutes
and
to start.
To set how long the
oven works (max. 23 h
59 min).
To set the switch-off
time for a heating func-
tion (max. 23 h 59 min).
sounds 3 times and the bar flashes and
then disappears.
6.10 Fast Heat Up Indicator
This function decreases the heat-up time.
Do not put food in the oven
when the Fast heat up
function works.
To turn on the function, hold
seconds. The heat-up indicator
alternates.
6.11 Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
If you use the clock
functions: Duration, End
Time, the oven turns off the
heating elements after 90 %
of the set time. The oven
uses the residual heat to
continue the cooking
process until the time ends
(3 - 20 minutes).
7.2 Setting the clock functions
Before you use the
functions: Duration, End
Time, you must set a heating
function and temperature
first. The oven turns off
automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically turn on and
turn off the oven on a given
time later.
The functions: Duration and
End Time do not work when
you use the core
temperature sensor.
1. Set a heating function.
ENGLISH
19
for 3
Advertisement
Table of Contents
