Cleaning The Brush - LG VR668 VW Series Owner's Manual

The rotating Brush, located on the bottom of Robot Cleaner, helps collect the dust. Clean the Brush
as per the following sequence.
※ Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin.
Otherwise, the main unit can get scratched and dust will fall from the Dust Bin.
Turn the Main Power Switch
OFF before starting the clean.
Put the Robot Cleaner upside
down on a soft cloth.
Push the Brush all the way
into the yellow protrusion.
Fit the Fixing Hook
(rectangular shape) on
the side of the Brush into
the slots, with the colors
matching.

CLEANING THE BRUSH

After checking for foreign
materials, press down the
Fixing Hook and pull it up to
separate the brush Cover.
While pushing the Brush, lift
the white protrusion part up to
separate it from the main unit.
While pushing the Brush to
the arrow direction, fit the
Fixing Hook (rectangular
shape) on the opposite side
into the slot.
By using the cleaning tool,
clear hairs and other debris
and foreign materials on
the Brush and from the 2
smaller jockey wheels.
Carefully clean the Brush
with a vacuum cleaner or
scissors.
Press down and close the
Cover until a 'crack' sound
is heard from both sides of
Fixing Hook.
※ Be careful not to trap the
side brush bristles under
the cover when closing it.
43