Button Functions - LG VR668 VW Series Owner's Manual

BUTTON FUNCTIONS – ROBOT CLEANER
• If the button is pressed, 'Turbo Mode' will be set with a voice confirmation.
TURBO
• If the button is pressed whilst in 'Turbo Mode' , it will be canceled.
• Used to turn the power on from Standby, start or stop cleaning.
• If the button is pressed whilst the unit is powered ON, it will start cleaning.
• If button is pressed during the cleaning, it will stop the cleaning.
START/STOP
• If the button is pressed for about 2 sec. whilst the power is ON, the power will
be returned to Standby.
• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.
• Used to return the Robot Cleaner back to the home station for charging.
HOME
• If cleaning is finished or the battery is low, the Robot Cleaner will return to
the Home Station by itself to recharge its battery.
• Pressing the 'TURBO' and 'START/STOP' button for 3 seconds will activate
BUTTON(KEY)
or deactivate the Lock function.
LOCK ON/OFF • If 'Lock' is ON, a voice announcement "Key lock has already been set" will be
heard each time a button is pressed.
• Press and hold both the 'START/STOP' and HOME button on the main unit
Voice Alert
for 3 sec. to turn ON/OFF the Voice Alert.
On/Off
• Voice Alert On/Off is not displayed as the product icon.
• Pressing the 'HOME' button for 3 seconds will change the language for the
Language
voice message.
• You cannot use this function with the button on the remote controller.
Product
• Press and hold down the Turbo button for 3 seconds to activate the
registration
registration mode with a voice message.
(Wi-Fi) • This mode is for registering the product to Robot Cleaner over Wi-Fi.
10