Table of Contents
Advertisement
Table 25 DHCP (continued)
LABEL
Start IP
End IP
Lease Time
Relay IP
DNS Server Assigned by the DHCP Server
First~Third
DNS Server
Static DHCP
MAC
Address
IP Address
Add
OK
DHCP Leased Hosts
MAC
Address
IP Address
Remaining
Time
Refresh
7.8 Static Route
Use these settings to create fixed paths through the network.
Click Network Setting > Route > Static Route to open this screen as shown
next.
Figure 32 Static Route Screen
HES-309M Series User's Guide
DESCRIPTION
Enter the start IP address from which the WiMAX Device begins
allocating IP addresses.
Enter the end IP address at which the WiMAX Device ceases allocating
IP addresses.
Enter the duration in minutes that devices on the LAN retain their
DHCP-issued IP addresses. At the end of the lease time, they poll the
WiMAX Device for a renewed or replacement IP.
Enter the name of the IP address to be used.
Select how the WiMAX Device acquires its DNS server address.
•
None - Select this to not use a DNS server.
•
From ISP - Select this to have the WiMAX Device acquire its DNS
server address from the ISP.
•
User Define - Select this to manually enter the DNS server used by
the WiMAX Device.
This field displays the MAC address of the static DHCP client connected
to the WiMAX Device.
This field displays the IP address of the static DHCP client connected to
the WiMAX Device.
Click this to add a new static DHCP entry.
Click this to save any changes made to this list.
This displays the MAC address of the DHCP leased host.
This displays the IP address of the DHCP leased host.
This displays the how much time is left on the host's lease.
Click this to refresh the list.
Chapter 7 Network Settings
85
Advertisement
Table of Contents
