Wimax Frequency Settings - ZyXEL Communications HES-309M User Manual

Wimax outdoor cpe
Table of Contents

Advertisement

Table 5 Setup Wizard > LAN Settings (continued)
LABEL
Lease
Time
DNS Server assigned by DHCP Server
First DNS
Server
Second
DNS
Server
Third
DNS
Server
Back
Next

3.1.3 WiMAX Frequency Settings

The WiMAX Frequency Settings screen allows you to configure the broadcast radio
frequency used by the WiMAX Device.
Note: These settings should be provided by your ISP.
Figure 6 Setup Wizard > WiMAX Frequency Settings
HES-309M Series User's Guide
DESCRIPTION
Enter the duration in minutes before the device requests a new IP address
from the DHCP server.
Specify the first IP address of three DNS servers that the network can use.
The WiMAX Device provides these IP addresses to DHCP clients.
Specify the second IP address of three DNS servers that the network can
use. The WiMAX Device provides these IP addresses to DHCP clients.
Specify the third IP address of three DNS servers that the network can use.
The WiMAX Device provides these IP addresses to DHCP clients.
Click to display the previous screen.
Click to proceed to the next screen.
Chapter 3 Setup Wizard
25

Advertisement

Table of Contents
loading

Table of Contents