Table of Contents
Advertisement
7.10.1 Port Forwarding Wizard
Use this wizard to set up a port forwarding rule for incoming service requests to
the ports on your local network.
Click Network Setting > NAT > Port Forwarding > Wizard to open this
screen as shown next.
Figure 35 Port Forwarding Wizard Screen
This screen contains the following fields:
Table 29 Port Forwarding Wizard
LABEL
Active
Port Forward
Rule
Rule Name
Protocol
Incoming Start
Port
Incoming End
Port
Forwarding
Start Port
Forwarding End
Port
Server IP
HES-309M Series User's Guide
DESCRIPTION
Select this to make this port forwarding rule active.
Select the type of port forwarding rule.
Enter a name for the port forwarding rule.
Select the port forwarding protocol.
Enter the starting port number for incoming traffic for the port
forwarding rule.
Enter the ending port number for incoming traffic for the port
forwarding rule.
Enter the starting port number for forwarded traffic for the port
forwarding rule.
Enter the ending port number for forwarded traffic for the port
forwarding rule.
Enter the port forwarding server IP address.
Chapter 7 Network Settings
89
Advertisement
Table of Contents
