Table of Contents
Advertisement
2
Hardware Installation
S/PDIF-out Connector
The S/PDIF-out connector (J21) is used to connect an external
S/PDIF-out port. Your S/PDIF-out port may be mounted on a card-
edge bracket. Install the card-edge bracket to an available slot at the
rear of the system chassis then connect the audio cable connector to
J21. Make sure pin 1 of the audio cable connector is aligned with pin
1 of J21.
44
SPDIF out
Key
GND
+5V
N. C.
1
5
Advertisement
Table of Contents
