Table of Contents
Advertisement
1
Introduction
wake-on-USB
from the S3 (STR - Suspend To RAM) state.
rtc timer
and time.
ACPI STR
fication. ACPI has energy saving features that enables PCs to imple-
ment Power Management and Plug-and-Play with operating systems
that support OS Direct Power Management. Currently, only Win-
dows
enabled in the Power Management Setup will allow you to use the
Suspend to RAM function.
With the Suspend to RAM function enabled, you can power-off the
system at once by pressing the power button or selecting "Standby"
when you shut down Windows
go through the sometimes tiresome process of closing files, applica-
tions and operating system. This is because the system is capable of
storing all programs and data files during the entire operating session
into RAM (Random Access Memory) when it powers-off. The oper-
ating session will resume exactly where you left off the next time you
power-on the system.
Power failure
recovery
automatically.
14
This function allows you to use a USB key-
board or USB mouse to wake up a system
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for
2 USB ports, the 5V_standby power source of your power sup-
ply must support ≥ 1.5A. For 3 or more USB ports, the
5V_standby power source of your power supply must support
≥ 2A.
The RTC installed on the system board allows your
system to automatically power-on on the set date
The system board is designed to meet the ACPI
(Advanced Configuration and Power Interface) speci-
® ® ® ® ®
98/2000/ME/XP supports the ACPI function. ACPI when
Important:
The 5V_standby power source of your power supply must sup-
port ≥ 720mA.
When power returns after an AC power fail-
ure, you may choose to either power-on the
system manually or let the system power-on
® ® ® ® ®
98/2000/ME/XP without having to
Advertisement
Table of Contents
