Advertisement
IV Pole
The trolley is fitted with 4 locations for the IV pole,1 located at each corner of the trolley.
A thumb screw allows the pole, both to be locked vertically for use, and horizontally for storage
as shown (Fig 1 and Fig 2).
The IV Pole is manufactured from 316 stainless steel, and is stamped with the serial No. of the
trolley.
IMPORTANT NOTE: As a safety precaution, please check the serial No. of the IV Pole
matches the trolley's serial No. before using.
Oxygen Cylinder Holder
An Oxygen Cylinder holder is also optional, suitable for a size E cylinder, fitted in the centre of
the wheel base. A double holder is also available as shown. (Fig 3)
The oxygen cylinder holder must not be used to transport anything other than a size E
cylinder or cylinders.
WARNING: THE OPERATOR MUST ENSURE THE OXYGEN CYLINDER IS MR SAFE
BEFORE PLACING IN THE HOLDER
Operating Instructions
Fig 1
Fig 3
9
Fig 2
Advertisement
