Installing Lock - Samsung SDS SHS-3320 User Manual

Installing lock

|
Outside
A
1. Installing the Dead Bolt(E)
E
H1
* If there is round strike hole, change the faceplate, and
insert the deadbolt following right side drawing.
2. Installing the Exterior Unit
E
I
A
D
E
H2
I
1. Before installation
1) Check the faceplate type of your door.
2) Make sure the deabolt directon as shown before
inserting it into a door side.
2. Insert the deadbolt from the side of the door.
3. Fix the deadbolt using two FH+T4X19 screws.
Left-handed Right-handed
1. Ensure the Exterior Unit is aligned with the center hole of
the deadbolt and the tailpiece is already cut.
2. Attach the exterior unit.
3. Insert the tailpiece to the exterior unit through the dead
E
bolt.
The dead bolt must be in a retracted position.
CAUTION: In case of right-handed door, insert the tailpiece
I
horizontally.
In case of left-handed door, insert the tailpiece vertically.

SHS-3320/3321
Samsung SDS
Digital Door Lock
Inside
C B
G
L
H3
E