Miscellaneous; Miscellaneous Information - Samsung SDS SHS-3320 User Manual

Miscellaneous

Miscellaneous Information

|
Reset to Factory Default
Resetting the lock will delete all registered information.
Note: After Reset, let the sensor detect the magnet to set the hand type again.
All registered Master and user data will be deleted, and the lock will be reset to default
settings.(Refer to the Program section on Page 15 for default values.)
Press the [Registration] button for 10 sec-
onds.
Successful: Ding dong → Ding ding
→Ding ding
9V Battery Emergency Power
Note: P lease, be aware of that there has be more than 50mm gap between the door frame
and the external power contact to place the 9V battery for temporary access.
Continuing to use the lock without replacing the batteries when required will lead to lock
malfunction. Touching a 9V DC battery to the external power contacts on the under-side of the
Exterior Unit will allow for temporary access (continue touching the battery to the contacts until
the lock is open).
Restart Function
Note: Restarting does not delete registered information.
If there is no response after touching the [Touchscreen],
use a pin to press the [Restart] button on the left of the
external power contact of the Exterior Unit.
Samsung SDS
Digital Door Lock
Enter the current Master PIN Code and press
the [ ] button.
Successful: Ding dong dang
Failed: Ding dong ding dong
1 1
SHS-3320/3321