Table of Contents
Advertisement
AXIS Q60 Series
Additional settings
Note
If you set the shift to night mode to occur when it's brighter, the image remains sharper as there will be less low-light
noise. If you set the shift to occur when it's darker, the image colors are maintained for longer, but there will be more
image blur due to low-light noise.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
•
Adjust the trade-off between noise and motion blur. Go to Settings > Image > Exposure and move the Blur-noise
trade-off slider toward Low noise.
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
Note
When you reduce the max gain, the image can become darker.
•
Set the max gain to a lower value.
•
Open the aperture.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
Image without WDR.
Image with WDR.
8
Advertisement
Table of Contents
