Table of Contents
Advertisement
AXIS Q60 Series
Specifications
Multicable connectors
1
Camera multiconnector
2
Audio in (pink)
3
Audio out (green)
4
Power connector, 3-pin
5
I/O terminal block, 6-pin
The multicable provides the following connectors:
Power connector - 3-pin terminal block used for power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source
(LPS) with either a rated output power limited to ≤100 W or a rated output current limited to ≤5 A.
DC power input
Audio in (pink) - 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio out (green) - 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active speaker
with a built-in amplifier. A stereo connector must be used for the audio out.
I/O terminal connector - Use with external devices in combination with, for example, tampering alarms, motion detection, event
triggering, and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the
interface to:
•
Digital output — For connecting external devices such as relays and LEDs. Connected devices can be activated by
the VAPIX® Application Programming Interface or from the product's webpage.
•
Digital input — For connecting external devices that can toggle between an open and closed circuit, for example
PIR detectors, door/window contacts, and glass break detectors.
Multicable overview
AC power input
31
Advertisement
Table of Contents
