Axis ExCam XPT Q6075 User Manual page 15

AXIS Q60 Series
Additional settings
Make sure that AXIS Video Motion Detection is running:
1. Go to Settings > Apps > AXIS Video Motion Detection.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs. If you need help, see the
user manual for AXIS Video Motion Detection 4.
Add a preset position:
Go to Settings > PTZ and set where you want the camera to be directed by creating a preset position.
Create a rule:
1. Go to Settings > System > Events > Rules and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select a video motion detection condition under Application.
4. From the list of actions, select Go to preset position.
5. Select the preset position you want the camera to go to.
6. Click Save.
Record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and to
stop one minute after.
Turn on audio:
1. Set up the stream profile to include audio, see Add audio to your recording on page 18.
Turn on audio detection:
1. Go to Settings > System > Detectors > Audio detection.
2. Adjust the alarm level according to your needs.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Audio, select Audio Detection.
4. In the list of actions, under Recordings, select Record video.
5. Select the stream profile where audio has been turned on.
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/58173#t10101129
15